switch off the heating unit after porous ceramic filter heating is finished. guide inert fuel into the rotor and release molten aluminum into the box when the heater temperature... moreswitch off the heating unit after porous ceramic filter heating is finished. guide inert fuel into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.
check the sealing among inlet/outlet and launder.
test the cone located in heat protection draining inside the backside.
test the molten aluminum temperature (min 720°C). Make the peak of molten aluminum be far from the launder bottom at 3cm for watching the molten aluminum going into thebox.
The operator shall wear shielding clothes to close the duvet. The slag on the surface can be skimmed via the porous ceramic filter when the molten aluminum flows into the box.
start manufacturing while the temperature is as much as 780°C. close porous ceramic filter outlet for heating renovation.
Molten aluminum can be retained in the box with setting temperature during the warmth protection phase however with no molten aluminum managing.